Wiki Home >> SIO-Commands-for-Device-ID-$70

SIO-Commands-for-Device-ID-$70

The following table shows the currently proposed SIO commands for Device $70 - The FujiNet Device itself.

CommandDescription
$00Test
$3FGet HSIO Index
$53Fujicmd status
$B0DIAGNOSTIC: Alter SIO Timing for T0
$B1DIAGNOSTIC: Alter SIO Timing for T1
$B2DIAGNOSTIC: Alter SIO Timing for T2
$B3DIAGNOSTIC: Alter SIO Timing for T3
$B4DIAGNOSTIC: Alter SIO Timing for T4
$B5DIAGNOSTIC: Alter SIO Timing for T5
$BCQR Input
$BDQR Encode
$BEQR Length
$BFQR Output
$C5Hash Output
$C6Hash Length
$C7Hash Compute
$C8Hash Input
$C9Base64 Decode Output
$CABase64 Decode Length
$CBBase64 Decode Compute
$CCBase64 Decode Input
$CDBase64 Encode Output
$CEBase64 Encode Length
$CFBase64 Encode Compute
$D0Base64 Encode Input
$D1Device Enable Status
$D2Get Time
$D3Random Number
$D4Disable Device
$D5Enable Device
$D6Set Boot Mode
$D7Mount All
$D8Copy File
$D9Enable/Disable CONFIG in D1:
$DAGet Device Slot Filename
$DBClose App Key
$DCOpen App Key
$DDRead App Key
$DEWrite App Key
$DFSet External SIO Clock
$E0Get Host Prefix
$E1Set Host Prefix
$E2Set Filename for Device Slot
$E3Set HSIO Index
$E4Set Directory Position
$E5Get Directory Position
$E6Unmount Host
$E7New Disk
$E8Get Adapter Config
$E9Unmount Device Image
$EAGet WiFi Enabled
$F0Enable UDPStream mode
$F1Write Device Slots
$F2Read Device Slots
$F3Write Host Slots
$F4Read Host Slots
$F5Close Directory
$F6Read Directory
$F7Open Directory
$F8Mount Device Image
$F9Mount Host
$FAGet WiFi Status
$FBSet SSID and Connect
$FCGet Scan Result
$FDScan Networks
$FEGet SSID
$FFReset FujiNet

This list is very much in progress and is subject to change.

Wiki content is mirrored from the FujiNet Github Wiki