Wiki Home >> SIO-Command-$DA-Get-Device-Slot-Filename
SIO-Command-$DA-Get-Device-Slot-Filename
This is a command for Device $70 - The FujiNet Device itself (see SIO-Commands-for-Device-ID-$70).
Description
Gets the filename for a given device slot.
DAUX1 specifies the device slot to perform the operation on.
DAUX1 value 0x1A selects the cassette tape slot.
Parameters
| DCB | Value |
|---|---|
| DDEVIC | $70 |
| DUNIT | $01 |
| DCOMND | $DA |
| DSTATS | $40 |
| DBUF | 256 byte buffer to hold full path |
| DTIMLO | $0F |
| DBYT | 256 |
| DAUX1 | Slot $00-$07 for disks, $1A for tape |
Examples
CC65
/**
* Set filename for device slot
*/
void fuji_sio_get_filename_for_device_slot(unsigned char slot, const char* filename)
{
OS.dcb.ddevic=0x70;
OS.dcb.dunit=1;
OS.dcb.dcomnd=0xDA;
OS.dcb.dstats=0x40;
OS.dcb.dbuf=filename;
OS.dcb.dtimlo=0x0F;
OS.dcb.dbyt=256;
OS.dcb.daux1=slot;
siov();
}
See Also
Wiki content is mirrored from the FujiNet Github Wiki