Wiki Home >> DIAGNOSTIC:-Alter-SIO-Timing-for-T0
DIAGNOSTIC:-Alter-SIO-Timing-for-T0
This is a command for Device $70 - The FujiNet Device itself (see SIO-Commands-for-Device-ID-$70).
Alter SIO Timing for T0 ($B0)
Description
Alters the Timing value (in microseconds) for Timing value 0.
From the Atari Hardware Manual:
The computer generates a delay (tO) between the lowering of COMMAND-
and the transmission of the first byte of the command frame.
computer tO (min) = 750 microsec.
computer tO (max) = 1600 microsec.
peripheral tO (min) = ??
peripheral tO (max) = ??
Parameters
| DCB | Value |
|---|---|
| DDEVIC | $70 |
| DUNIT | $01 |
| DCOMND | 0xB0 |
| DSTATS | 0x00 |
| DBUF | NULL |
| DTIMLO | 0x0F |
| DBYT | 0 |
| DAUX | 16-bit value containing # of microseconds in little-endian order |
Examples
See thwap tool, for examples of how to alter this value:
GitHub Link
See Also
- DIAGNOSTIC: Alter SIO Timing for T1
- DIAGNOSTIC: Alter SIO Timing for T2
- DIAGNOSTIC: Alter SIO Timing for T3
- DIAGNOSTIC: Alter SIO Timing for T4
- DIAGNOSTIC: Alter SIO Timing for T5
Wiki content is mirrored from the FujiNet Github Wiki