Wiki Home >> N:-SIO-Command-'T'---Set-Translation

N:-SIO-Command-'T'---Set-Translation

N: SIO Command SET TRANSLATION ($54) ['T']

This is a command for Devices $71-$78 - The N: Device (see SIO-Commands-for-Device-IDs-$71-to-$78).

Description

Set the aux1 and aux2 parameters for a given channel. This has the effect of setting translation for a given Network protocol, and is overridden by a subsequent OPEN command.

Parameters

DCB	Value
DDEVIC	$71
DUNIT	$01 - $04
DCOMND	$54 'T'
DSTATS	$00
DBUF	NULL
DTIMLO	$0F
DBYT	0
DAUX1	new aux1 value (see below)
DAUX2	new aux2 value (see below)

Aux1 values

aux1	description
4	READ
8	WRITE
12	READ/WRITE

Aux2 values

These values change how incoming CR/LF characters are translated into EOL, and translate how EOL characters are turned back into CR or CR/LF, respectively:

aux2	description
0	No Translation
1	CR to EOL, EOL to CR
2	LF to EOL, EOL to LF
3	CR/LF to SPACE/EOL, EOL to CR/LF

Examples

CC65

OS.dcb.ddevic=0x71;
OS.dcb.dunit=1;
OS.dcb.dcomnd='T';
OS.dcb.dstats=0x00;
OS.dcb.dbuf=NULL;
OS.dcb.dtimlo=0x0f;
OS.dcb.dbyt=0;
OS.dcb.daux1=12;
OS.dcb.daux2=3; // Set to CR/LF.
siov();

Atari BASIC

XIO ASC('T'),#1,0,3,"N:":REM SET TRANSLATION CR/LF to SPACE/EOL, EOL to CR/LF