Skip to content
FujiNet Go

FujiNet Go

Intellivision

The Intellivision on Android, with a touch controller and FujiNet CONFIG at power-on.

FujiNet Go Intv v1.0.13 Released September 19, 2026 Mattel Electronics, 1979

Download and install Source code Also on Desktop

Screenshots

Phone

FujiNet CONFIG on the Intellivision, with the touch disc and keypad
In landscape the disc and keypad sit either side of the screen
Settings, with FujiNet configuration, ECS and Intellivoice

Tablet

FujiNet CONFIG on a tablet, with the disc and keypad either side

Features

  • On-screen controller with a 16-way disc snapped to 8 directions, a 12-key keypad and three action buttons
  • ECS keyboard overlay; ECS and Intellivoice set to Auto, Off or On; NTSC or PAL
  • Cartridges .rom, .bin and .int, with an optional .cfg memory map
  • RESET taps to reset, or hold it to return to FujiNet CONFIG
  • Gamepads; FujiNet web UI at 127.0.0.1:8057

BIOS ROMs

Required

The Intellivision needs Mattel's EXEC and GROM. ECS is optional.

FileWhat it isCRC32Needed
exec.bin Executive ROM (8 KB) CBCE86F7 Required
grom.bin Graphics ROM (2 KB) 683A4158 Required
ecs.bin Entertainment Computer System (24 KB) EA790A06 Optional

How to add them: The first-run screen asks for the files and checks their exact size and CRC.

There is no public download we can link to. Use a dump of your own Intellivision's ROMs; MAME calls this set intv.

Download and install

FujiNet Go Intv 1.0.13, released September 19, 2026. Release notes

Phone or tablet

Android 8.0 or later.

Download fujinet-go-intv-v1.0.13.apk

34.2 MB

  1. Open the downloaded APK from your notifications or the Files app.
  2. If Android asks, allow your browser or Files app to install unknown apps, then go back and tap Install.
  3. Start FujiNet Go Intv. On first run it asks for the BIOS ROMs listed above.

Not on Google Play yet, so updates are installed the same way: download the new APK and install it over the old one.

Chromebook and Android TV

On a Chromebook with Google Play enabled, download the APK and open it from the Files app; ChromeOS installs it like a phone.

This app has an Android TV launcher banner. Install it from a computer with adb after turning on developer options and network debugging on the TV:

adb connect <tv-address>
adb install fujinet-go-intv-v1.0.13.apk

A sideloading app such as Downloader on the TV works too: give it the APK link from this page.

BIOS ROMs on a TV: Android TV has no system file picker, so the first-run ROM screen can't open your files there yet. A phone, tablet or Chromebook can.

Or install from a computer over USB:

adb install fujinet-go-intv-v1.0.13.apk
Every file in this release, with SHA-256 checksums
FileForSizeSHA-256
fujinet-go-intv-v1.0.13.apk Android 34.2 MB 8ca94f586eb46a19a5c04678b53c10ead14aff9e8177d1399c28c497ff5aa6cd

Built on

FujiNet Go Intv is free software (GPL-3.0). It stands on these projects:

  • jzIntv 20200712 GPL-2.0-or-later

    Emulator core, patched for FujiNet. Joseph Zbiciak

  • fujinet-firmware GPL-3.0-or-later

    The FujiNet itself, built into every app. Thomas Cherryhomes and the FujiNet contributors

  • Mbed TLS Apache-2.0

    TLS for FujiNet's network protocols. The Mbed TLS contributors

  • libssh, libsmb2, libnfs LGPL-2.1-or-later

    FujiNet's SSH, SMB and NFS protocols. Their respective authors

  • cJSON, expat MIT

    JSON and XML parsing in FujiNet. Dave Gamble; the Expat maintainers

The full list of bundled code, versions and licences is in COMPLIANCE.md. Source code · All releases · Report a problem