Skip to content
FujiNet Go

FujiNet Go

Apple II

An Apple II with a FujiNet SmartPort card, on Android.

FujiNet Go Apple2 v1.1.3 Released September 2, 2026 Apple, 1977

Download and install Source code Also on Desktop

Screenshots

FujiNet CONFIG on the Enhanced //e, with the on-screen keyboard (Total Replay mounted from the SD card)

Features

  • Enhanced //e by default, plus ][, ][+, J-Plus, //e, Pravets 82/8M/8A, Base64A and TK3000
  • Mockingboard, Phasor, CP/M, SAM/DAC and Video HD cards in slots 3, 4 and 5; FujiNet in slot 7
  • On-screen keyboard with Open Apple, Closed Apple and Ctrl-RESET
  • Analog joystick and paddles; a gamepad's left stick drives the paddles
  • Hardware keyboards; FujiNet web UI at 127.0.0.1:8000

BIOS ROMs

Required

The Apple //e's system, video and Disk II ROMs are imported on first run.

FileWhat it isCRC32Needed
Apple2e_Enhanced.rom Enhanced //e system ROM (16 KB) 1D70B193 Required
Apple2e_Enhanced_Video.rom Enhanced //e video ROM (4 KB) 2651014D Required
DISK2.rom Disk II controller (0 KB) CE7144F6 Required

How to add them: The first-run screen asks for the files and checks them by size, then CRC.

Where to get them

Download and install

FujiNet Go Apple2 1.1.3, released September 2, 2026. Release notes

Phone or tablet

Android 8.0 or later.

Download fujinet-go-apple2-v1.1.3.apk

63.9 MB

  1. Open the downloaded APK from your notifications or the Files app.
  2. If Android asks, allow your browser or Files app to install unknown apps, then go back and tap Install.
  3. Start FujiNet Go Apple2. On first run it asks for the BIOS ROMs listed above.

Not on Google Play yet, so updates are installed the same way: download the new APK and install it over the old one.

Chromebook and Android TV

On a Chromebook with Google Play enabled, download the APK and open it from the Files app; ChromeOS installs it like a phone.

This app has an Android TV launcher banner. Install it from a computer with adb after turning on developer options and network debugging on the TV:

adb connect <tv-address>
adb install fujinet-go-apple2-v1.1.3.apk

A sideloading app such as Downloader on the TV works too: give it the APK link from this page.

BIOS ROMs on a TV: Android TV has no system file picker, so the first-run ROM screen can't open your files there yet. A phone, tablet or Chromebook can.

Or install from a computer over USB:

adb install fujinet-go-apple2-v1.1.3.apk
Every file in this release, with SHA-256 checksums
FileForSizeSHA-256
fujinet-go-apple2-v1.1.3.apk Android 63.9 MB 42c679feeb63523175b843b6704e5d92a5b1c1667cf18296fcd0773ecf38036e

Built on

FujiNet Go Apple2 is free software (GPL-3.0). It stands on these projects:

  • AppleWin GPL-2.0-or-later

    Emulator core (fork github.com/FujiNetWIFI/AppleWin, linux branch). Tom Charlesworth and the AppleWin contributors

  • libyaml, minizip, Boost headers, zlib MIT; Zlib; BSL-1.0; Zlib

    Libraries used by AppleWin. Their respective authors

  • fujinet-firmware GPL-3.0-or-later

    The FujiNet itself, built into every app. Thomas Cherryhomes and the FujiNet contributors

  • Mbed TLS Apache-2.0

    TLS for FujiNet's network protocols. The Mbed TLS contributors

  • libssh, libsmb2, libnfs LGPL-2.1-or-later

    FujiNet's SSH, SMB and NFS protocols. Their respective authors

  • cJSON, expat MIT

    JSON and XML parsing in FujiNet. Dave Gamble; the Expat maintainers

The full list of bundled code, versions and licences is in COMPLIANCE.md. Source code · All releases · Report a problem