FujiNet 1.0

$55.00$65.00

#FujiNet is the latest peripheral in development for Atari 8 Bit computers. Originally intended to be a network adapter, it has become an all encompassing SIO peripheral emulator. The software is still a work in progress, but it currently emulates many Atari peripherals (see the list here).

Clear

JTAG

Future firmware updates are installed through the onboard MicroUSB port. JTAG port optional, used for debugging the FujiNet Firmware only. Connector mates with Espressif's JTAG Debugger model ESP-PROG.

Subtotal:

Add-ons total:

Total:

SKU: FN32ROV-1.0 Category: Tags: , , , ,

Description

#FujiNet is the latest peripheral in development for Atari 8 Bit computers. Originally intended to be a network adapter, it has become an all encompassing SIO peripheral emulator. The software is still a work in progress, but it currently emulates many Atari peripherals (see the list here).

FujiNet is designed with a custom SIO plug which is intended to connect directly into any Atari 8 Bit computer and also has a custom SIO receptacle on the back for connecting to other “real” Atari peripherals. There is a MicroSD socket on the right side for storing disk images, printer PDF files and configuration information (wifi credentials, disk drive config, etc). Three buttons are easily accessible on the top and currently serve the following functions: Left (short press: disk swap, long press: enable/disable SIO2BT mode), Middle (hold during power up to reset FujiNet config), Right (FujiNet reset). Three LED’s on the front provide the following status: WHITE Left (wifi connected), BLUE Middle (SIO2BT Mode), ORANGE Right (SIO activity).

On the left side there is an ON/OFF slide switch (Up is on, Down is off). The MicroUSB port above the power switch can be used to power the FujiNet as well as update it’s firmware. FujiNet can also be powered directly from the Atari through the SIO connector without the need for MicroUSB.

Additional information

Case Style

No Case, 400-800, XL, XE